Posts Tagged ‘3V’

Changing/Putting in the Battery

Posted by Erin, the RobotGrrl on Thursday, June 19th, 2008

Incase the Styrobot’s battery fell out when it was shipped, or if you already used it up, I came up with two pics here that illustrate where to put the battery. Basically there are three rows of pins, top, middle and bottom. The battery goes between the top pins and the middle pins. BUT the top pins have to be covered with tape or not touching the battery. The wire from the motor has to be touching the battery, too. Don’t worry about the polarity as it’s only a tiny DC motor… and it won’t matter much in a Styrobot. =D

Battery Illustration Battery Illustration

Hope this helps everyone!

Posted in: Projects, Robot.

Styrobots



    The story of my Styrobots begins with my acceptance into the Stanford EPGY Summer Institutes Artificial Intelligence program for 2008. In order to go there, I needed money! So, I came up with Styrobots.
    All of the money from Styrobots goes towards my Robotic Fund. This enables me to buy parts for the robots that I enjoy creating!
    I appreciate all help! :D

Robotic Fund

Housekeeping