Friday Night Robotics – Yoda Bot Extender Shield and R2D2

Y O D A ! This Friday Night Robotics I added an extra shield to the Rampage Robot, aka Yoda Bot. BUT I also did some other random things during this week. No computers though, all hardware this week.
The plan is to take this stackable robot design, and actually add a layer to it!

From the shield extending headers that I received from Krafter’s big box and some protoboard that I have hanging around, this should be a pretty simple task. This is the finished product!

Not sure about the center of gravity with Yoda sort of hanging off the back of the robot. This will probably have to be tested. It would be nice if it is offset from the center just enough to produce some cool wheelies!
Some other things that I did that week were…
Bought some rechargeable D cell batteries for Artoo!

The amount of detail that was put in to this robot toy is so amazing, it’s really cool. Check out the sparkly gold “wires” on its feet!

When I eventually hack Artoo, I’m going to do it by splicing the wires, because I still want the “original” Artoo to be operational. Check out Artoo wearing my NASA JPL cap!

Here’s a video of some of the things that Artoo can do already:
Testing Out R2D2 from RobotGrrl on Vimeo.
The next thing that I did was paint the Lego for the RoboGlyphs stand to be conductive. This is using the conductive paint that Krafter sent in the big box!

The paint smells really bad, I highly recommend painting it outside.

For the second coat, I did indeed paint it outside:

That’s about it. It dried, but I’m a little worried about the cracks between the bricks. I’ll measure the resistance with an Ohm Meter next time to see if it is continuous!





