MANOI’s Antennas and Tidying Up

Posted by Erin, the RobotGrrl on Tuesday, May 18th, 2010

One of the annoying things about MANOI is that there are many things that can break very often. The antennas broke very often, mainly at the plug part, where the wires plug into the Arduino, and thankfully not the difficult part, the leads to the LEDs. The wires connecting the LEDs to the Arduino were way too long and throwing off the center of gravity for the balance. Also, the leads for the LEDs were uncovered. This is not aesthetically pleasing, and it is unsafe.

First step was to remove the wires currently attached to the LED (these were red white green black wires), cut the new wires (red orange yellow brown) to a shorter length. Solder on the new wires, and use green shrink wrap. The green is important, since this colour matches MANOI’s colour scheme

When all four are done:

The terminals were where a lot of breaks occurred, so these had to be improved. The previous way this was handled was that I soldered the wires to pins on a 3 pin male header, then placed hot glue around the solder joints. This time, I used shrink wrap instead of the glue.

It makes sure that it is nice and sturdy. People can actually touch it now, and it won’t break!

The ground bus was also very messy the first time around. This was now fixed, and cannot be seen since it will be within MANOI’s head unit.

After positioning and hot gluing, it looks great!

The new antennas really go with the colour theme

Here you can see that the wires are much tidier.

And voila! MANOI looks much happier now.

As for the rest of tidying up… I made a quick battery caddy out of a watch tin to keep my batteries organized into charged or needs to be charged!

On MANOI’s other hand with the hockey stick is this adapter that sort of extends the hand from the servo a bit. I figured I might as well add it to the other hand as well. I also fixed the bows with the jingle bells and reattached them to MANOI’s wrists- that’s what the velcro is for in the below picture

Fixed MANOI’s hockey stick plug in adapter wires:

The next improvement was to the power switch that powers the servos. The switch keeps on breaking, so I wanted to redo it. Since I was redoing it, I figured I might as well use one of the switches that lights up! Since there’s three prongs, and one of them is a Ground, I wanted to be overly careful and make sure I test it first…

The switch works, lights up, and doesn’t blow up! It’s rated for 12V, and the battery is 11.1V. Hopefully there is enough wiggle room there. I’m pretty pleased with the way it looks and works in comparison to the broken switch.

That’s about all that has been accomplished this far. There’s still a lot more to do! On my workdesk now I have two ultrasonic sensors, a gyro and accelerometer, and many photoresistors (LDR). I want to somehow hook up the LDRs to MANOI and make a program where I can shine a light at them, and MANOI would move accordingly. Taking it a step further, I’d attach the light to a Wii Nunchuck where MANOI could number crunch and analyze the accelerations from the nunchuck to do something — maybe make a prediction about where the light will be going. It would sort of be like a game of Simon, only the “Simon” would be MANOI, and would be actively trying to outsmart you.

Posted in: MANOI, Projects, Robot.
Tags: antennas, Arduino, battery caddy, MANOI, ping pong, shrink wrap, three prong switch

One Response to “MANOI’s Antennas and Tidying Up”

1. swantron Says:
   May 26th, 2010 at 5:03 PM

   Sweet project! This is one of the cooler Arduino projects I have seen.

Leave a Reply

Name (required)

Mail (will not be published) (required)

Website